ChemCo Large Void Grout Used to Support Fiberglass Tanks in Food Manufacturing Plant

Problem: Install Epoxy Grout into 1 cm Voids Under Fiberglass Tanks

Solution: ChemCo Large Void Grout

  • Project Requirement was for a No-Odor Structural Void Filler with Little Shrinkage to Support 38,000 Gallon Tank Bottoms
  • Engineer Specifies Grout, Large Void for Slow, Low-Pressure Injection
  • Contractor Uses Manifold Injection Setup to Equalize Grout Flow Under Tank
  • Model B Pump can Control Pressure to Within 2 psi without Surging and has Automatic Shutoff when A or B Reservoir is Empty

Tell us about your project

CALL 650-261-3790.