Chemical Grouting 1
Chemical Grouting 2
Chemical Grouting 3
ChemCo Systems Logo

PRODUCT GUIDE · INJECTION GROUTING

CCS™ Chemical Grouts

Polyurethane and Acrylate Injection Grouts to Stop Water Infiltration

ChemCo Systems hydrophilic and hydrophobic chemical grouts stop water infiltration through concrete, brick, and masonry and stabilize the soil behind and beneath structures. Each system is engineered for fast, predictable field performance on critical infrastructure and commercial assets, from hairline seepage to high-flow active leaks.

HYDROPHILIC PU

CCS Grout 1G Hydro Gel

Flexible Water-Stop Gel

Single-component polyurethane that reacts with water to form a flexible seal.

NSF 61 Compliant
VISCOSITY 50–100 cP
EXPANSION Gel
HYDROPHOBIC PU

CCS Grout 2 Flex

Low Viscosity Flexible Foam

Low-viscosity flexible foam for moving cracks, cold joints, and shotcrete pockets.

NSF 61 Compliant
VISCOSITY 500 cP
EXPANSION 1,000%
HYDROPHOBIC PU

CCS Grout 2 Flex SLV

Super Low Viscosity Flexible Foam

Super-low-viscosity flexible foam for hairline cracks and tight joints where movement is constant.

NSF 61 Compliant
VISCOSITY 250 cP
EXPANSION 1,000%
HYDROPHOBIC PU

CCS Grout 3 Combination

Tough Flexible Foam

Forms a tough, closed-cell foam that fills cracks and voids and builds grout curtains.

NSF 61 Compliant
VISCOSITY 450 cP
EXPANSION 1,500%
HYDROPHOBIC PU

CCS Grout 4 Cut Off

Semi-Rigid Foam

Our most widely used foam. Semi-rigid and fast-expanding to shut off active, high-flow leaks.

NSF 61 Compliant
VISCOSITY 400 cP
EXPANSION 1,800%
HYDROPHILIC ACRYLATE

CCS Acryl 100

Ultra-Low Viscosity Flexible Gel

100% solids, ultra-low-viscosity acrylate gel that penetrates fine soil and narrow voids and does not shrink when dry.

 
VISCOSITY ~5 cP
EXPANSION Gel
chemcosystems.com 2800 Bay Road, Redwood City, CA 94063 Phone: 650.261.3790
ChemCo Systems Logo
CCS™ Chemical Grouts
SELECTION GUIDE
Condition 1G Hydro Gel 2 Flex 2 Flex SLV 3 Combination 4 Cut Off Acryl 100
Hairline and fine cracks
Moving cracks and dynamic joints
Active high-flow leaks
Large voids
Curtain and underslab grouting
Soil stabilization
Constant damp conditions
Potable water structures
Primary recommendation
Suitable

TYPICAL APPLICATIONS

  • Active High-Flow Water Leaks
  • Below-Grade Parking Structures
  • Leaking Foundations & Basements
  • Elevator Shafts
  • Tunnels, Sewers & Manholes
  • Marine Seawalls
  • Containment Basins
  • Water & Wastewater Facilities
  • Shotcrete Pockets & Shadowing
  • Soil Stabilization

WHY CHOOSE CHEMCO SYSTEMS?

  • Complete range for hairline cracks, high-flow leaks, large voids, and soil stabilization
  • Polyurethane grouts certified to NSF/ANSI 61 for potable water contact
  • Cures in wet or dry conditions; adjustable catalyst tunes gel time and expansion
  • In-house chemistry that can be tailored to the application and environment
  • Pairs with CCS epoxy injection resins and coatings for complete restoration
  • 50+ years of formulation expertise, field support, and fast U.S. fulfillment

Who is ChemCo Systems?

ChemCo Systems specializes in high-performance polymer technology for concrete rehabilitation and protection. ChemCo Systems is part of American Polymers Network (APN), the largest group of family-owned chemical manufacturing companies in the United States. APN encompasses fourteen product lines that cover the full range of construction materials, and operates over 1,000,000 sq. ft. of manufacturing space in six states.

All products are manufactured in the United States.

sales@chemcosystems.com | 650.261.3790

American Polymers Network
  • Urethane deck coatings
  • Below-grade waterproofing
  • Epoxy structural repair
  • Protective coatings
  • Chemical injection grouts
  • Spray foam insulation
  • Decorative floor coatings
  • Roof coatings