Kemko® Coatings

Kemko® coatings are intended primarily for use in industrial applications as protection from corrosive acids, alkalis and solvents as well as fuels, oils and greases. All of our coatings are 100% solids, are low odor, are not flammable, have very low shrinkage, contain no solvents, and have very low VOCs so they can be used almost anywhere. Most are capable of being installed on damp substrates and we also make a couple of underwater coatings for fresh or salt water. A wide selection of epoxies and a quick curing, very flexible polyurea membrane are available with the capability of resisting up to 94% sulfuric acid.

Kemko® epoxy-based coatings require no primer but in some circumstances the desired film thickness may require a build up of multiple coats. Polyurea Membrane offers high flexibility and very fast cure (can be opened in ~2 hours) without the need to spray it through specialized (heated impingement mixing) equipment—it can be placed manually by roller or squeegee. All of these coatings can be skid-proofed by embedding sand or grit into the surface layer or back-rolling a thin coverage over the broadcast particles. Please call us with your specific need or refer to our chemical resistance guide (PDF file).

  

Kemko® Coating

070 FlorWal

Features

Excellent solvent resistance

Primary Uses

Industrial floors, walls

Download Spec Info

005 HiChem

Features

Acid resistance, several colors including red

Primary Uses

Secondary containment, storage areas, tankfarms, sewer pipes

Download Spec Info

161 Concentrated Sulfuric Acid Coating

Features

Novolac epoxy with extreme chemical resistance

Primary Uses

Resists 95% sulfuric at room temperature

Download Spec Info

064 LV Coatings

Features

Most flexible of our epoxies, choice of viscosities, low cost

Primary Uses

Driving ramps and other high use areas

Download Spec Info

064UC Coatings

Features

Most flexible of our epoxies, choice of viscosities, low cost

Primary Uses

Driving ramps and other high use areas

Download Spec Info

A-1 for Asphalt or Concrete

Features

Resists automotive fluids, very flexible, low cost

Primary Uses

Pavement coating for loading areas

Download Spec Info

036 Marine Structures

Features

Two coat application, Kevlar™ reinforced

Primary Uses

Coating for concrete, steel, and wood marine structures, salt or fresh water

Download Spec Info

048 Hi Build Marine Structures

Features

Single coat resists tidal action, Kevlar™ reinforced

Primary Uses

Coating for concrete, steel, and wood marine structures, salt or fresh water

Download Spec Info

181 Polyurea, Membrane

Features

Unique–ambient temperature cure, can be hand applied, re-open in 3-4 hours

Primary Uses

Flexible fast curing deck coating

Download Spec Info

186 Epoxy Healer/Sealer

Features

Ultra low viscosity, clear, 0 VOC

Primary Uses

To consolidate cracked decks

Download Spec Info

234 FC Coat

Features

Complies with FDA 21 CFR 175.300 for direct contact: dry bulk and aqueous foods

Primary Uses

Tough chemical resistant coating; noncorrosive hardener for direct contact with foods

Download Spec Info

246 MVR Primer

Features

Reduces moisture vapor transmission from 15 lb. to under 2 lb.

Primary Uses

For damp or wet slabs with moisture vapor movement

Download Spec Info

141 QuikPrime

Features

Works under difficult conditions including cold and wet. Effective on green concrete (24 hrs after placement).

Primary Uses

Epoxy primer for urethanes, polyureas and epoxies, in wet applications. Acts as vapor barrier.

Download Spec Info
Why does epoxy asphalt last so long? Is it the right product for you?

25 incredible tips for concrete pros.

Download Now

  

 

All of our epoxy products are 0 VOC and compliant with the criteria for the IEQ4.1 low-emitting adhesives, sealants credit by the U.S. Green Building Council’s LEED (Leadership in energy and Environmental Design) program.