ASTM C 881 Chart

 

Type* UseGrade 1Grade 2Grade 3
INon-load Hard-hardKemko® 038, 030, 068, 050, 165, 077, 026Kemko® 001, 028Kemko® 028, 009, 124, 160
IINon-load Fresh-hard077001, 028028, 009, 124, 160
IIISkid resist. mtl. to hard 051, 047, 128, 082, 157DA059, 183
IVLoad Hard-Hard038, 030, 068, 050, 165, 026001, 028028, 009, 124, 160
VLoad Fresh-Hard038, 030, 068, 050, 165, 026 001, 028 028, 009, 124, 160
VI Load Segmental precastN/aN/a 124, 160
VINon-load Segmental precastN/aN/a 124, 160

*Definitions

Type I — For use in non-load bearing applications for bonding hardened concrete to hardened concrete and other materials, and as a binder in epoxy mortars or epoxy concretes.

Type II — For use in non-load bearing applications for bonding freshly mixed concrete to hardened concrete.

Type III — For use in bonding skid resistant materials to hardened concrete, and as a binder in epoxy mortars or epoxy concretes used on traffic bearing surfaces (or surfaces subject to thermal or mechanical movements).

Type IV — For use in load-bearing applications for bonding hardened concrete to hardened concrete and other materials and as a binder for epoxy mortars and concretes. This category is considered to be a technical equivalent to AASHTO M 235.

Type V — For use in load-bearing applications for bonding freshly mixed concrete to hardened concrete.

Type VI — For bonding and sealing segmental precast elements with internal tendons and for span-by-span erection when temporary post tensioning is applied.

Type VII — For use as a non-stress carrying sealer for segmental precast elements when temporary post tension is not applied as in span-by-span erection.

Grade 1 — Low viscosity

Grade 2 — Medium viscosity

Grade 3 — Non-sag viscosity