CCS Coatings
ChemCo Systems coatings are intended primarily for industrial applications as protection from corrosive acids, alkalis and solvents as well as fuels, oils and greases. All of our coatings are 100% solids, are not flammable, have very low shrinkage, contain no solvents or water, and have 0 VOCs so they can be used almost anywhere. Most are capable of being installed on damp substrates and we even make a couple of underwater coatings for fresh or salt water. A wide selection of epoxies and a quick curing, very flexible polyurea membrane are available. Our chemcical resistant novolac epoxy coating has the capability of resisting up to 94% sulfuric acid (battery acid). Many of our epoxy coatings are used in loading and handling areas that require double (secondary) containment of hazardous materials.
ChemCo’s epoxy-based concrete coatings are self-priming but in many applications (particularly for high chemical resistance or immersion service) the desired film thickness may require a build up of multiple coats. Polyurea Membrane offers high flexibility and very fast cure (can be opened in ~2 hours) without the need to spray it through specialized (heated impingement mixing) equipment—it can be placed manually by roller or squeegee. All of these coatings can be skid-proofed by embedding sand or grit into the surface layer or back-rolling a thin coverage over the broadcast particles. Please call us with your specific need or refer to our epoxy coating chemical resistance guide(PDF file).
Epoxy Healer/Sealer has found new applications in concrete countertop finishes in addition to beneficial improvements when restoring older and cracked concrete floors in retail and commercial floors during grinding and polishing operations.
Recent additions to our product line include the food grade epoxy FC Coating for FDA food contact (on concrete substrates) described under FDA 21 CFR 175.300 and MVR Coating for concrete slab on grade moisture vapor reduction under impervious floorings which include vapor barrier coatings and vinyl tiles.
Features
- 100% solids coatings are non-flammable with low odor
- Do not require a primer
- Can be placed on damp substrate
- Meet all local VOC requirements, including LEED IEQ 4.1
- Resistant to common industrial chemicals, fuels and lubricants
- QuikPrime can be used on green (24 hr) or wet concrete
- FC: O VOC epoxy coating direct food contact (FDA 21CFR 175.300 for food grade coatings)
- MVR for concrete floor slabs with high vapor transmission rates
Interactive CCS Catalog of Epoxies for Concrete Repair, Maintenance and Restoration
DownloadCCS Coating
General Purpose
Features
Excellent solvent resistance
Primary Uses
Industrial floors, walls
High Chemical Resistance
Features
Acid resistant, chemical resistant, several colors including red
Primary Uses
Secondary containment, storage areas, tankfarms, sewer pipes
Conc. Sulfuric Acid Resistance
Features
Novolac epoxy with extreme chemical resistance, including battery acid
Primary Uses
Resists 94% sulfuric at room temperature, resists other acids such as hydrochoric, nitric and acetic
Utility
Features
Most flexible of our epoxies, choice of viscosities, low cost
Primary Uses
Driving ramps and other high use areas
Utility LV
Features
Most flexible of our epoxies, choice of viscosities, low cost
Primary Uses
Driving ramps and other high use areas
A-1 for Asphalt or Concrete
Features
Resists automotive fluids, very flexible, adheres to new asphalt
Primary Uses
Pavement secondary containment coating for truck loading areas
Marine Structures Coat
Features
Two coat application, Kevlar™ reinforced
Primary Uses
Coating for concrete, steel, and wood marine structures, salt or fresh water
Hi Build Marine Structures
Features
Single coat resists tidal action, Kevlar™ reinforced
Primary Uses
Coating for concrete, steel, and wood marine structures, salt or fresh water
Polyurea, Membrane
Features
Unique–ambient temperature cure, can be hand applied, re-open in 3-4 hours
Primary Uses
Flexible fast curing deck coating
Epoxy Healer/Sealer
Features
Ultra low viscosity, can be repaired or re-coated even after cured, can withstand heavy traffic in 5 hrs.
Primary Uses
To consolidate cracked decks, seal concrete countertops and sinks, polishing aid for concrete floors
HiTemp
Features
Extreme temperature resistance combined with chemical protection
Primary Uses
Exposure to corrosive hot liquids and vapors
FC
Features
Meets FDA 21 CFR 175.300; good chemical resistance
Primary Uses
Food grade for direct food contact (bulk and aqueous)
MVR
Features
Reduces vapor transmission from 15 lb/1000 ft/24hr to 3 lb. (ASTM F1869). Can be placed after 10 days cure time.
Primary Uses
Slab on grade concrete with high moisture vapor transmission (from 3-15 lbs.)
QuikPrime
Features
Works in cold and wet conditions; effective on green concrete (24 hrs after placemt)
Primary Uses
Primer for urethane, polyurea and epoxy products, for use on damp or wet substrates. Is a vapor barrier.
Before ------ After
