ChemCo Large Void Grout used to support fiberglass tanks in food manufacturing plant
| Problem: Install epoxy grout into 1 cm voids under fiberglass tanks |
| Solution: ChemCo Large Void Grout |
| > |
Project requirement was for a no-odor structural void filler with little shrinkage to support 38,000 gallon tank bottoms |
| > |
Engineer specifies Grout, Large Void for slow, low-pressure injection |
| > |
Contractor uses manifold injection setup to equalize grout flow under tank |
| > |
Model B pump can control pressure to within 2 psi without surging and has automatic shutoff when A or B reservoir is empty |
