 Find an Applicator
Product Data/MSDS
|
 |
Kemko® Epoxy Resins for ASTM C881 Specification
| Type* |
Use |
Grade 1 |
Grade 2 |
Grade 3 |
| I |
Non-load
Hard-hard |
Kemko 038, 030, 068, 050, 165, 077, 026 |
Kemko 001, 028 |
Kemko 028, 009, 124, 160 |
| II |
Non-load
Fresh-hard |
077 |
001, 028 |
028, 009, 124, 160 |
| III |
Skid resist. mtl. to hard |
051, 047, 128, 082, 157DA |
|
059, 183 |
| III |
Load
Hard-hard |
038, 030, 068, 050, 165, 026 |
001, 028 |
028, 009, 124, 160 |
| IV |
Load
Hard-hard |
038, 030, 068, 050, 165, 026 |
001, 028 |
028, 009, 124, 160 |
| V |
Load
Segmental precast |
N/a |
N/a |
124, 160 |
| VI |
Non-load
Segmental precast |
N/a |
N/a |
124, 160 |
 |
*Definitions
Type I — For use in non-load bearing applications for bonding hardened concrete to hardened concrete and other materials, and as a binder in epoxy mortars or epoxy concretes.
Type II — For use in non-load bearing applications for bonding freshly mixed concrete to hardened concrete.
Type III — For use in bonding skid resistant materials to hardened concrete, and as a binder in epoxy mortars or epoxy concretes used on traffic bearing surfaces (or surfaces subject to thermal or mechanical movements).
Type IV — For use in load-bearing applications for bonding hardened concrete to hardened concrete and other materials and as a binder for epoxy mortars and concretes.
Type V — For bonding and sealing segmental precast elements with internal tendons and for span-by-span erection when temporary post tensioning is applied.
Type VI — For use as a non-stress carrying sealer for segmental precast elements when temporary post tension is not applied as in span-by-span erection.
Grade 1 — Low viscosity
Grade 2 — Medium viscosity
Grade 3 — Non-sag viscosity
 Top of page
|
|
