| General |
Portable wheeled pump meters and mixes 1:1 ratio, 2-component medium viscosity liquid flexible epoxy or polyurea slot filling compounds for sawcut shrinkage control joints in warehouse and industrial floor applications. Especially useful on large projects or for fast-setting polymers. Eliminates waste and off-ratio mixes |
| Design |
4 wheel wagon with translucent "A" and "B" component PE reservoirs |
| Materials of construction |
Steel |
| Color |
Red |
| Dimensions |
Height = 32", Width = 36", Length = 25" |
| Weight |
40 lbs. dry weight |
| A Capacity |
5 gallons |
| B Capacity |
5 gallons |
| Power & Drive |
1 15 Vac, 3 Amps. 90V DC motor, 1750 rpm |
| Motor speed |
Variable, from 0 to 350 rpm, controlled by electronic controller |
| Speed & Flow Control |
Variable speed electronic controller. 5:1 ratio right angle speed reducer
Slowing to stop (O rpm) and no flow at 200 p.s.i.
Automatic by preset. |
| Pump ON/OFF control |
Remote operating switch |
| Flow control |
Remote flow control double valve with large handle for precise control of flow at the workface |
| A Pump |
Precision metering tool steel gear pump, 5 g.p.h. at 1750 rpm |
| A Pump protection |
Final in-line filter on pump inlet |
| B Pump |
Precision metering tool steel gear pump, 5 g.p.h. at 1750 rpm |
| B Pump protection |
Final in-line filter on pump inlet |
| Ratio |
1:1 by volume |
| Ratio accuracy |
+/- 5% maximum error @ a 5 gallon/hour flow rate |
| Pumping pressure |
0 to 250 p.s.i. range |
| Delivery rate |
0 to 10 gallons of mixed adhesive per hour maximum |
| Delivery hoses |
25 ft. in length, fuel resistant elastomer |
| Special features |
Translucent reservoirs, electronic rate controller, double filter protection of the component pumps, can be operated by a crew of one, can use mix head or disposable static mixer element. Most common maintenance and repair parts easily and quickly obtained through Grainger or McMaster-Carr. |
Top of page
The Model D is a high volume two-component electric gear drive pump for delivering 1:1 ratio self-leveling epoxy and polyurea slot filling liquids. Also cart mounted, it draws from 2-5 gallon translucent reservoirs and is operated remotely. This is a great efficiency tool for large warehouse floor saw cut shrinkage joints, wire loops and other bulk liquid applications. As a productivity aid, it ought to pay for itself in about a half of a job.