 Product Data/MSDS
|
 |
ChemCo Systems coatings are intended primarily for industrial applications as protection from corrosive acids, alkalis and solvents as well as fuels, oils and greases. All of our coatings are 100% solids, are not flammable, have very low shrinkage, contain no solvents, and have very low VOCs so they can be used almost anywhere. Most are capable of being installed on damp substrates and we even make a couple of underwater coatings for fresh or salt water. A wide selection of epoxies and a quick curing, very flexible polyurea membrane are available with the capability of resisting up to 90% sulfuric acid.
ChemCo's epoxy-based coatings are self-priming but in some circumstances the desired film thickness may require a build up of multiple coats. Polyurea Membrane offers high flexibility and very fast cure (can be opened in ~2 hours) without the need to spray it through specialized (heated impingement mixing) equipment—it can be placed manually by roller or squeegee. All of these coatings can be skid-proofed by embedding sand or grit into the surface layer or back-rolling a thin coverage over the broadcast particles. Please call us with your specific need or refer to our chemical resistance guide (PDF file).
Features
| > |
100% solids coatings are non-flammable with low odor |
| > |
Do not require a primer |
| > |
Can be placed on damp substrate |
| > |
Meet all local VOC requirements |
| > |
Resistant to common industrial chemicals |
| CCS Coating |
Primary Uses |
Features |
| General Purpose |
Industrial floors, walls |
Excellent solvent resistance |
| High Chemical Resistance |
Secondary containment, storage areas, tankfarms, sewer pipes |
Acid resistance, several colors including red |
| Conc. Sulfuric Acid Resistance |
Resists 95% sulfuric at room temperature |
Novolac epoxy with extreme chemical resistance |
| Utility and Utility LV |
Driving ramps and other high use areas |
Most flexible of our epoxies, choice of viscosities, low cost |
| A-1 for Asphalt or Concrete |
Pavement coating for loading areas |
Resists automotive fluids, very flexible, low cost |
| Marine Structures Coat |
Coating for concrete, steel, and wood marine structures, salt or fresh water |
Two coat application, Kevlar™ reinforced |
| Hi Build Marine Structures |
Coating for concrete, steel, and wood marine structures, salt or fresh water |
Single coat resists tidal action, Kevlar™ reinforced |
| Polyurea, Membrane |
Flexible fast curing deck coating |
Unique--ambient temperature cure, can be hand applied, re-open in 3-4 hours |
| Epoxy Healer/Sealer |
To consolidate cracked decks |
Ultra low viscosity |
 |
Before
After
 Top of page
|
|
